ZyXEL ENC User Guide - Page 213
Additional Port VLAN Settings, Port Setting, Application, VLAN Management
View all ZyXEL ENC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Chapter 8 Application 8.3.2.1.1 Additional Port VLAN Settings Use this screen to configure the selected port's additional VLAN settings. To open this screen, click Port Setting in the Application > VLAN Management > Edit > Add or Edit screen. Figure 162 VLAN Management > VLAN Management > Edit > Add/Edit > Port Setting The following table describes the labels in this screen. Table 98 VLAN Management > VLAN Management > Edit > Add/Edit > Port Setting LABEL DESCRIPTION Port Number Port VID This field displays the number of the selected port. This field displays the VLAN ID assigned to untagged frames that this port receives. Enter another VLAN ID if you want to change the setting. Ingress Check GVRP Select this to have the device discard incoming frames for VLANs that do not have this port as a member. GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for switches to register necessary VLAN members on ports across the network. Select this check box to allow GVRP on this port. Acceptable Frame Type Specify the type of frames allowed on the port. Select All from the drop-down list box to accept all untagged or tagged frames on this port. Select Tag Only to accept only tagged frames on this port. All untagged frames will be dropped. VLAN Trunking Cancel OK Enable VLAN Trunking on ports connected to other switches or routers (but not ports directly connected to end users) to allow frames belonging to unknown VLAN groups to pass through the device. Click this to discard all changes and close the screen. Click this to save the settings and close the screen. ENC User's Guide 213