ZyXEL ENC User Guide - Page 252
IP Surveillance Device Configuration, Profiles to NVR Switches.
View all ZyXEL ENC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
Chapter 8 Application The following table describes the labels in this screen. Table 128 IP Surveillance > Profile > Traffic Guarantee Profile: Add LABEL DESCRIPTION Name Specify the name of the profile. You may use 1-30 alphanumeric characters. Commit Rate Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on a port. The commit rate should be less than the peak rate. The sum of commit rates cannot be greater than or equal to the uplink bandwidth. Peak Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on a port. 8.6.12 IP Surveillance Device Configuration You can assign traffic and power profiles to ports on each device. To access this screen, click IP Surveillance > Configuration > Device Configuration. Select a device and click Edit Port to access the following screen. Note: If the selected device is an Access Switch, you can assign the Traffic Profile, Power Profile and Power Management Profile. If the selected device is an Aggregate Switch, you can assign the Traffic Guarantee Profile. You can also assign Traffic Profiles to NVR Switches. Figure 206 IP Surveillance > Configuration > Device Configuration: Edit Port - Access Switch Figure 207 IP Surveillance > Configuration > Device Configuration: Edit Port - Aggregate Switch The following table describes the labels in this screen. Table 129 IP Surveillance > Configuration > Device Configuration: Edit Port LABEL DESCRIPTION Polling Interval Specify the polling interval for the device. Select from 1, 5, 10, 30 or 60 minutes. Active Select ports and click this to activate them. 252 ENC User's Guide