ZyXEL ENC User Guide - Page 220
Table 103, Label, Description
View all ZyXEL ENC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Chapter 8 Application Note: The table columns may vary depending on different device models. Figure 168 Port Management > Bandwidth Control The following table describes the labels in this screen. Table 103 Port Management > Bandwidth Control LABEL DESCRIPTION Activate Bandwidth Control Select this check box to enable bandwidth control on the device. Copy Click this to copy the selected port's settings to another port. The screen appears as shown next. Figure 169 Copy Port Commit Rate Active Ingress Commit Rate Peak Rate Active Ingress Peak Rate Egress Rate Active Egress Rate Specify the port number to which you want to copy the selected port's settings. Click OK to apply the changes to the Port Management > Bandwidth Control screen. Otherwise, click Cancel to discard the change and close this screen. This field displays the port number. Select this check box to activate commit rate limits on this port. Specify the guaranteed bandwidth in kilobits per second (Kbps) for the incoming traffic flow on a port. The commit rate should be less than the peak rate. The sum of commit rates cannot be greater than or equal to the uplink bandwidth. Select this check box to activate peak rate limits on this port. Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on a port. Select this check box to activate egress rate limits on this port. Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the out-going traffic flow on a port. 220 ENC User's Guide