Compaq ProLiant 1000 ProLiant Server Troubleshooting Guide - Page 134
Utility, or the server setup utility remotely by using a workstation running terminal
View all Compaq ProLiant 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Error Recovery Table 5-2: System Configuration Utility Settings for Booting into Diagnostics continued Option Setting Description Network IP address xxx.xxx.xxx.xxx Enter the IP address for this server in standard dot notation. NOTE: The network IP address is not used if you select Custom for Network controller. You must enter your IP address in the NET.CFG file that you load into the system partition. Network IP net mask xxx.xxx.xxx.xxx Enter the net mask for this server in standard dot notation. NOTE: The network IP net mask is not used if you select Custom for Network controller. You must enter your IP address in the NET.CFG file that you load into the system partition. Network IP router address xxx.xxx.xxx.xxx Enter the router to be used for this server in standard dot notation. NOTE: The network IP router address is not used if you select Custom for Network controller. You must enter your IP address in the NET.CFG file that you load into the system partition. If you configure the server to restart and then access the Diagnostics and Utilities menu, it prepares for remote communication. You can run Diagnostics, the Inspect Utility, or the server setup utility remotely by using a workstation running terminal emulation software, such as Insight Manager 7. HP Servers Troubleshooting Guide 5-13