Compaq ProLiant 1000 ProLiant Server Troubleshooting Guide - Page 168

Test Error Codes Table B-2: Primary Processor Test Error Codes continued Error Code Description Recommended Action 122-XX Multiprocessor Dispatch test failed The following steps apply to error codes 122-XX and 123-XX: 123-XX Interprocessor Communication test failed 1. Check the system configuration and retest. 2. Replace the processor and retest. 3. Replace the system board and retest. 199-XX Installed devices test failed 1. Check the system configuration and retest. 2. Check cable connections and retest. 3. Check switch settings, jumper settings, or both, and then retest. 4. Run the server setup utility and retest. 5. Replace the processor and retest. 6. Replace the system board and retest. 200-299, Memory Test Error Codes The 200 series of diagnostic error codes identifies failures with the memory subsystem. Corrective action may require replacement of the memory expansion board, the memory modules, or the processor assembly. Table B-3: Memory Test Error Codes Error Code 200-XX 201-XX 202-XX Description Invalid memory configuration Memory machine ID test failed Memory system ROM checksum failed Recommended Action Reinsert memory modules in correct location and retest. The following steps apply to error codes 201-XX and 202-XX: 1. Replace the system ROM and retest. 2. Replace the processor and retest. 3. Replace the memory expansion board and retest. continued HP Servers Troubleshooting Guide B-3