Compaq ProLiant 1000 ProLiant Server Troubleshooting Guide - Page 201

POST Error Messages Table C-4: 200 Series POST Error Messages continued Error Code Audible Beeps Probable Source of Problem 213-Processor None Disabled, Processor X The PPM and voltage regulator module (VRM) for processor X is not installed correctly. 214-DC-DC Converter None Failed PPM failed. 214-Memory Device Failure. Error Code:X Memory Module DIMM:Y 2 short A memory module has failed. 214-Processor board PPM failed None Missing or failed PPM. 214-Processor PPM Failed, Module X. None Indicated PPM failed. 214-Processor PPM Failed, Processor Bus X None A processor PPM has failed or is missing. The failed PPM is located on a disabled processor bus. 215-Non-functioning Voltage Regulator Module for Processor X None PPM (DC-DC converter) failed or lost redundancy. 215-Processor PPM not installed, module None A processor has been installed without its corresponding PPM. 216-Processor board PPM has lost redundancy None Indicated PPM has lost redundancy. 216-Processor PPM has lost Redundancy, Module X. None Indicated PPM has lost redundancy. Action Check whether the PPM and VRM is installed and correctly seated. Run Diagnostics. Replace failed assembly as indicated. Run Diagnostics. Replace failed memory module as indicated. Run Diagnostics. Replace failed assembly as indicated. Run Diagnostics. Replace failed assembly as indicated. Run Diagnostics. Replace failed assembly as indicated. Run Diagnostics. Replace failed assembly as indicated. Run Diagnostics. Install assembly as indicated. Run Diagnostics. Replace failed assembly as indicated. Run Diagnostics. Replace failed assembly as indicated. continued HP Servers Troubleshooting Guide C-21