Compaq ProLiant 1000 ProLiant Server Troubleshooting Guide - Page 235
XC-55, Smart Array 4250ES
View all Compaq ProLiant 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
POST Error Messages Table C-13: 1700 Series POST Error Messages continued Error Code Audible Beeps Probable Source of Problem 1757 - Array Accelerator Daughterboard incompatible with this model controller None 4-MB array accelerator board installed on Smart Array 42XX Controller. 1758- Drive Array Accelerator Size Mismatch Between Controllers 64MB Array Accelerator should be attached to both controllers. Array Accelerator is temporarily disabled. None Redundant Smart Array 4250ES Controller pair with incorrect array accelerator installed. 1759-Slot z Drive Array - Redundant Controller Error None Redundant controller problem. 1760-Fixed Disk X does not support Block Mode None Fixed disk drive error detected. 1761-Fixed Disk 1 does not support Block Mode None Fixed disk drive error detected. 1762-Redundant controller operation is not supported in this firmware version. None Old firmware on controller (does not support redundantcontroller operation). 1763- Array Accelerator daughtercard is detached; please reattach. None Array accelerator module is loose, missing, or defective. Action Replace 4-MB array accelerator board with a 16-MB or 64-MB board. Install 64-MB array accelerator module on both Smart Array 4250ES Controllers. Replace or reseat controllers. May also be caused by a defective system board. Run the server setup utility and correct. Run the server setup utility and correct. Upgrade controller firmware using Options ROMPaq. Replace array accelerator module, or reseat if connector is not fully mated. continued HP Servers Troubleshooting Guide C-55