Compaq ProLiant 1000 ProLiant Server Troubleshooting Guide - Page 252
Table D-1, Array Diagnostic Utility ADU Error Messages, Message, Description, Recommended Action
View all Compaq ProLiant 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
ADU Error Messages Table D-1: Array Diagnostic Utility (ADU) Error Messages Message Accelerator board not detected Accelerator error log Accelerator parity read errors: X Accelerator parity write errors: X Accelerator status: Cache was automatically configured during last controller reset Accelerator status: Data in the cache was lost due to some reason other than the battery being discharged. Description Array controller did not detect a configured array accelerator board. List of the last 32 parity errors on transfers to or from the memory on the array accelerator board. Displays starting memory address, transfer count, and operation (read and write). Number of times that read memory parity errors were detected during transfers from memory on array accelerator board. Number of times that write memory parity errors were detected during transfers to memory on the array accelerator board. Cache board was replaced with one of a different size. Data in cache was lost, but not because of the battery being discharged. Recommended Action Install an array accelerator board on an array controller. If an array accelerator board is installed, check for proper seating on the array controller board. If there are many parity errors, you may need to replace the array accelerator board. If there are many parity errors, you may need to replace the array accelerator board. If there are many parity errors, you may need to replace the array accelerator board. Normal operations should continue. Check to be sure that the array accelerator is properly seated. If the error continues, you may need to replace the array accelerator. continued D-2 HP Servers Troubleshooting Guide