Compaq ProLiant 1000 ProLiant Server Troubleshooting Guide - Page 232
Array - Physical Drive, Array - New Logical
View all Compaq ProLiant 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
POST Error Messages Table C-13: 1700 Series POST Error Messages continued Error Code Audible Beeps Probable Source of Problem 1724-Slot X Drive Array - Physical Drive Position Change(s) Detected - Logical drive configuration has automatically been updated. None Indicates that logical drive configuration has been updated automatically following physical drive position changes. 1725-Slot X Drive Array-Optional SIMM Failure Detected None SIMM has been automatically disabled due to memory errors or unsupported SIMM type installed. 1726-Slot X Drive Array - Array Accelerator Memory Size Change Detected. - Array Accelerator configuration has automatically been updated. None Array accelerator configuration has been automatically updated. 1727-Slot X Drive Array - New Logical Drive(s) Attachment Detected. If more than 32 logical drives, this message will be followed by: "Auto-configuration failed: Too many logical drives." None Additional drives detected. Action No action is needed. Replace SIMM memory module on indicated controller. This message indicates that the array accelerator configuration has been updated automatically due to replacement of the array accelerator (or controller) with one having different cache memory size. Run the Array Configuration Utility, if desired, to change the default cache read/write allocation ratio. This message indicates that the controller has detected an additional array of drives that was connected when the power was off. The logical drive configuration information has been updated to add the new logical drives. The maximum number of logical drives supported is 32. Additional logical drives will not be added to the configuration. continued C-52 HP Servers Troubleshooting Guide