Compaq ProLiant 1000 ProLiant Server Troubleshooting Guide - Page 46

Hardware Problems Rack Stability Before working with racks, be sure that you understand the following warning and caution information, which may appear in your server-specific user documentation. WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that: • The leveling jacks are extended to the floor. • The full weight of the rack rests on the leveling jacks. • The stabilizing feet are attached to the rack if it is a single-rack installation. • The racks are coupled together in multiple-rack installations. • Only one component is extended at a time. A rack may become unstable if more than one component is extended for any reason. WARNING: To reduce the risk of personal injury or damage to the equipment: 46-109 kg • Observe local occupational health and safety requirements and 100-240 lb guidelines for manual material handling. • Obtain adequate assistance to lift and stabilize the chassis during installation or removal. • The server is unstable when not fastened to the rails. • When mounting the server in a rack, remove the power supplies, the media/power supply drawer, the processor/memory drawer, and all System Power Modules to reduce the overall weight of the product. WARNING: To reduce the risk of personal injury or damage to the equipment, extend only one component at a time. The rack may become unstable if more than one component is extended. CAUTION: To maintain optimum cooling, a perforated rack door must be used with this server. Failure to use a properly ventilated door results in thermal damage to your server. 2-4 HP Servers Troubleshooting Guide