Sharp MX-M4070 User Manual - Page 100

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE UNIVERSAL DESIGN IN THE MACHINE The structure of the machine and the software are designed to allow all people to use the machine with ease. UNIVERSAL DESIGN RELATED TO OPERATION Adjustment of operation panel angle The angle of the entire operation panel can be adjusted to enable use even when seated. Grip handle on paper trays The grip-type handles allow easy use from above or below. By simply placing your hand on a handle and gently pulling forward, the lock releases. The trays can be manipulated in a natural manner. Changing of key response time The response time of the keys can be changed as needed. In "Settings" (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Condition Settings] → [Key Operation Setting]. • Time for Accepting Key Entry This setting determines how long a key in the touch panel must be tapped until the key input is registered. The time can be set from 0 to 2 seconds in increments of 0.5 seconds. By lengthening the time setting, key input can be prevented when a key is tapped accidentally. Keep in mind, however, that when a longer setting is selected more care is required when tapping keys to ensure that key input is registered. • Disable Auto Key Repeat This is used to disable key repeat. Key repeat causes a setting to change continuously not only each time the key is tapped but while a key is tapped. • Long-touch Detection Time Select a time when a long key touch is detected. • Double Tap Speed Interval Select an interval when a double tap is detected. 1-97