Sharp MX-M4070 User Manual - Page 635

SCANNER/INTERNET FAX►OTHER FUNCTIONS 5 Others Card Shot Background Adjustment Color Mode Tap the [On] key, and specify the original size as required. Contrast Adjust Contrast of Image Off Y 2 1/8 (1~8 1/2) inch Sharpness After the settings are completed, tap and [Back] keys in Adjust Outline of Image On Drop Out Color sequence. Remove Chromatic Color X 3 3/8 (1~8 1/2) inch Reset Preview CA Fit to Send Size Back Size : 5½x8½ Start • Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys. • To quickly set the size, first specify a value close to the desired ratio value by the numeric keys, then tap [-] or [+] for adjustment. • To enlarge or reduce the images to fit the paper based on the entered original size, tap the [Fit to Send Size] key. • After selecting Card Shot, tap the [Original] key in the base screen to change the original scan size or the send size. In this case, the screen of this step appears when you tap the scan size key. For the procedure for setting the send size, see "SPECIFYING THE SEND SIZE OF THE IMAGE (page 5-55)". To cancel the Card Shot settings Tap the [Off] key. 6 Tap the [Start] key, and scan the front side. 7 Place a card face up on the document glass, and tap the [Start] key to scan the reverse side. Before scanning the back of the card, tap the [Change Setting] key on the touch panel to change the exposure. 8 Tap the [Read-End] key. If you will continue by scanning the front of the card, you can tap the [Change Setting] key to change the exposure, resolution, scan size, and send size. 5-77