Sharp MX-M4070 User Manual - Page 38
Fix transition time., Change transition time by time of day.
View all Sharp MX-M4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE Fix transition time. The Auto Power-Off transition time is fixed. When this setting is enabled, the [Change transition time by time of day.] option is disabled. If the Auto Power-Off is disabled, the time you have set here is disabled. Change transition time by time of day. This function controls the transition to Auto Power Shut-Off mode optimally for each time period by analyzing the use of the machine based on job logs obtained during a 4-week period. When this setting is enabled, the [Fix transition time.] option is disabled. • The image transfer control settings are not changed. • This does not link to the Power On/Off Scheduling. If both of them are enabled, the Power On/Off Scheduling settings precede. • Pages are counted for each paper size separately. • When the power supply of the machine was off, there was no job during this time. Transition to Energy Saving and Auto Power Shut-Off modes Pattern Transition time Average outputs per hour * Mode1 (Job Start Priority1) After 1 hour 700 or more Mode2 (Job Start Priority2) After 30 minutes 150 to 699 Mode3 (Energy Saving Priority1) After 5 minutes 40 to 149 Mode4 (Energy Saving Priority2) After the minimum time period Up to 39 Sleep Mode Power Level * Factory default setting Low Power: The machine switches to the power saving mode, but it takes some time to recover. Fast Wake Up: Compared with Low Power, the power value rises by a certain degree, but it results in faster recovery. - Motion Sensor (MX-M3070/MX-M3570/MX-M4070/MX-M5070/MX-M6070): This enables switching of power saving modes by the motion sensor. 1-35