Sharp MX-M4070 User Manual - Page 572

SCANNER/INTERNET FAX►BEFORE USING THE MACHINE AS A NETWORK SCANNER ORIGINAL SIZE TRANSMITTABLE ORIGINAL SIZES The following original sizes can be transmitted Minimum original size Using the automatic document feeder 5-1/8" (height) x 5-1/2" (width) (131 mm (height) x 140 mm (width)) Using the document glass - *A long original can be transmitted. Maximum original size 11-5/8" (height) x 39-3/8" (width) (297 mm (height) x 1000 mm* (width)) 11-5/8" (height) x 17" (width) (297 mm (height) x 432 mm* (width)) THE SIZE OF THE PLACED ORIGINAL When a standard size original is placed, the original size is automatically detected and displayed in "Scan Size" on the based screen. ► SCAN SIZE AND SEND SIZE (ENLARGE/REDUCE) (page 5-49) Standard sizes are sizes that the machine can automatically detect. The standard sizes are set in "Original Size Detector Setting" in "Settings". When the automatic original detection function is operating and the original (of inch or non-standard size) is placed, the closest standard size may be displayed or the original size may not appear. In this event, manually set the correct original size. ► SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE (page 5-50) ► SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 5-51) To specify the size that the machine can automatically detect: Select the group of detected original sizes by selecting [System Settings] in "Setting mode (administrator)" → [Common Settings] → [Device Control] → [Original Size Detector Setting]. List of original size detector settings ►Detectable original sizes (page 1-122) 5-14