Sharp MX-M4070 User Manual - Page 763

SYSTEM SETTINGS►SETTING MODE LIST Setup Items Factory default setting U A ● User Count No Yes  View User Count - No Yes  Save User Count*3 - No Yes ● Billing Code Setting No Yes  Administration Settings - No Yes  Use Billing Code Disabled No Yes  Default Code Setting Default Code No Yes  Remember Billing Code Between Modes Disabled No Yes  Disable Change of Billing Code Disabled No Yes  Apply Default Code when Billing Code not entered Disabled No Yes  Disable Billing Code for Selected Applications No Yes • Sharp OSA All Invalid No Yes  Billing Code Display Name Setting No Yes • Main Code Display Name Default No Yes • Sub Code Display Name Default No Yes  Main Code List - No Yes  Sub Code List - No Yes ● Card Setting No Yes  Card Area Setting No Yes  Check System Code only in FeliCa User Area mode Disabled No Yes  Check Facility Code in HID mode Disabled No Yes  Importing from the setup file - No Yes  Card Scan Test*4 Disabled No Yes  Card Type / Card Reader Settings No Yes  Card Type / Card Reader 200 No Yes  Card Reader Device Registration*4 200 No Yes *1 Appears when [LDAP] is set in "Authentication Settings". *2 Appears when "Settings (administrator)" - [Sharp OSA Settings] → [External Accounting Application Settings] → [Set Authentication Server (Server 1)] is enabled. *3 This setting is configured in setting mode on the web page. *4 This setting is configured in setting mode on the machine. Page 1-64 1-65 1-81 1-66 7-9