Sharp MX-M4070 User Manual - Page 110

BEFORE USING THE MACHINE►LOADING PAPER Setting orientation of the print side The setting orientation varies for the print side of paper, depending on the tray used. For "Letter Head" and "Pre-Printed", set the paper in the reverse orientation. Place with the print side facing the direction indicated below. Tray In normal status With letter head or pre-printed paper set Trays 1 - 4 Facing up Facing down Bypass, Tray 5 Facing down Facing up When [Disabling of Duplex] is set for "Letter Head" or "Pre-Printed", set the print side in the same orientation as for the ordinary operation. To set [Disabling of Duplex]: In "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Disabling of Duplex]. Paper that cannot be used • Embossed paper • Special media for an ink jet printer (fine paper, glossy paper, glossy film, etc.) • Carbon paper or thermal paper • Pasted paper • Paper with clips • Paper with fold marks • Torn paper • Oil-feed transparency film • Thin paper less than 15 lbs (55 g/m2) • Heavy paper as thick as 110 lbs. cover (300 g/m2) over • Irregularly shaped paper • Stapled paper • Damp paper • Curled paper • Paper whose print side or reverse side has been already printed on by another printer or multifunction device. • Paper with a wave-like pattern due to moisture absorption • Paper with creases • Paper with dust Non-recommended paper • Iron-on transfer paper • Perforated paper 1-107