Sharp MX-M4070 User Manual - Page 217

COPIER►BEFORE USING THE MACHINE AS A COPIER CHECKING THE ORIGINAL SIZE Easy mode The size of the placed original is displayed in the upper left corner of the screen. When you place the original in the automatic document feeder, the original icon appears next to the original size. Original 8½x11 Paper Select 8½x11 Tray 1 Detail 2-Sided Copy Copy Ratio Staple / Punch 100% Off 1 → 1 CA Preview Copies 1 Start Normal mode Check the size of the placed original on the display of the [Original] key. If the original size is set to [Auto], the automatically detected size (standard size) is displayed. If the original size is specified manually, the specified original size is displayed. When you place the original in the automatic document feeder, the original icon appears above the automatic document feeder. Original Auto 8½x11 Paper Select Auto 2-Sided Copy 1-Sided→1-Sided Copy Ratio 100% Exposure Auto Sort/Group Auto Output Tray Others No. of copies 1 12 3 45 6 78 9 0 11 8½x11 2 8½x11R 3 8½x14 4 11x17 Plain 1 8½x11 Send and Print Quick File Store Data Temporarily File Store Data in Folder Call Eco Program Preview CA Start Standard sizes Standard sizes are sizes that the machine can automatically detect. To specify the standard size, select [System Settings] in "Settings (administrator)"→ [Common Settings] → [Device Control] → [Original Size Detector Setting]. For standard sizes that can be detected, refer to Original Size Detector Setting (page 1-122). • Even when [Original] is set to [Auto], some original sizes may be detected as other one that is near the standard size. In this case, manually set the original size. ► SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL (page 2-27) • When placing a non-standard size original on the document glass, you can make it easier for the size to be detected by placing a blank sheet of 8-1/2" x 11" (A4), 5-1/2" x 8-1/2" (B5), or other standard size of paper on top of the original. 2-9