Sharp MX-M4070 User Manual - Page 818

SYSTEM SETTINGS►SYSTEM SETTINGS Send Setting These settings are used to configure the settings for Internet fax. I-Fax Reception Report On/Off Setting This setting is used to request a reception report when an Internet fax is sent. I-Fax Reception Report Request Timeout Setting The duration of time that the machine will wait for a reception report from the destination machine can be set by any number from 1 hour to 240 hours in increments of 1 minute. This setting is only effective when "I-Fax Reception Report On/Off Setting (page 7-64)" is enabled. Number of Resend Times at Reception Error The number of resend attempts when an error message is received from an I-Fax recipient can be set to any number from 0 to 15. This setting is only effective when "I-Fax Reception Report On/Off Setting (page 7-64)" is enabled. Maximum Size of E-mail Attachments To prevent the transmission of excessively large image files by Internet fax, a file size limit can be set from 1 MB to 10 MB in increments of 1 MB. If the total size of the image files created by scanning the original exceeds the limit, the image files are discarded. If you do not wish to set a limit, select [Unlimited]. This setting is linked to "Maximum Size of E-mail Attachments(E-Mail) (page 5-29)" in Scan Settings. Rotation Sending Setting When transmitting an image that is one of the following sizes, this function rotates the image 90 degrees counterclockwise. (The setting can be configured separately for each size.) 8-1/2"x11", 5-1/2"x8-1/2"R, A4, B5R, A5R, 16K 8-1/2" x 11"R and A4R size images are not rotated. Default Own Number Sending You can include the date and your sender information (sender name and address) at the top of the page when the receiving machine prints an image that you send. Printing Page Number at Receiver When the transmitted image is printed by the receiving machine, the page number can be added to the top of each printed page. Recall in Case of Line Busy (This setting is only effective for Direct SMTP transmission.) This setting sets the number of recall attempts and the interval between recall attempts when a transmission is not successful due to the line being busy or other reason. Number of Times to Recall When Line is Busy This setting specifies whether or not recalling is performed when the line is busy. During recalling, you can set the number of recall attempts. Any number from 0 to 15 can be selected. 7-64