Sharp MX-M4070 User Manual - Page 504

FACSIMILE►OTHERS FUNCTION • The settings stored in a program will be retained even after the program is used for transmission. The same settings can be used repeatedly for transmission. • The following contents cannot be stored in programs: • Tapping the [Speaker] key, Quick File, File, page move and unspecified erase during preview, Metadata Entry, Send Settings, and Own Name Select. • Up to 48 programs can be stored. • Up to 500 destinations can be stored in one program. • A program in which sub addresses and passcodes are specified as an F-code destination records all sub addresses and passcodes. 1 Place the original. According to the function stored in the program, place the original in the document feeder tray of the automatic document feeder, or on the document glass. ► AUTOMATIC DOCUMENT FEEDER (page 1-124) ► DOCUMENT GLASS (page 1-126) 2 Tap [Call Program] on the action panel. 3 Address Book Address Fax Number Call Program Call registered settings when touched. Pre-Setting Program 01 Program1 03 03 05 05 07 07 09 09 Others 02 02 04 04 06 06 08 08 10 10 reception memory 100% Change Name Delete Register in Favorite Register for Home Preview CA Speaker Start Tap the desired program key. 4 Configure additional settings as required. Some settings cannot be added depending on the contents of the called program. 5 Tap the [Start] key to start scanning of the original. If you inserted the original pages in the document feeder tray, all pages are scanned. When you place the original on the document glass, scan each page one at a time. After you have scanned the last original, tap the [Read-End] key. A beep will sound to indicate that scanning and transmission have ended. You can tap the [Preview] key to check a preview of the image before sending a fax. For more information, see "CHECKING THE IMAGE TO BE TRANSMITTED (page 4-27)". 4-71