Sharp MX-M4070 User Manual - Page 518
Tap the checkbox of the edge that
View all Sharp MX-M4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 518 highlights
FACSIMILE►OTHERS FUNCTION 2 Enter the destination fax number. • Entering a destination number using the numeric keys ►page 4-11 • Retrieving a destination from an address book ►page 4-12 • Using a search number to retrieve a destination ►page 4-15 • Retrieving a destination from a global address book ►page 4-16 • Using a transmission log to resend ►page 4-18 3 Tap the [Others] key, and tap the [Erase] key. 4 Others Erase Up Clear Outer Frame Exposure Specify Send Exposure N-Up Put Multiple Pages in A Page Resolution Change Original Resolution Tap the checkbox of the edge that you wish to erase, and specify the erase position. Specify Frame+Center Left Right Reverse erase position of Down back face Center 1/2 (0 ~ 1) inch Outer Frame 1/2 (0 ~ 1) inch Back reception memory 100% Preview CA Speaker Start Check that he tapped checkbox is set to . If the [Specify Frame] key is tapped, the [Up], [Down], [Left], and [Right] checkboxes are set to . If the [Specify Frame+Center] key is tapped, all the checkboxes are set to . Specify the erase edge on the reverse side when erasing edges of one to three sides of Up, Down, Left, and Right on the front side to scan a 2-sided original. • If the [Reverse erase position of back face] checkbox is set to edge on the front side will be erased. , the edge in the position opposite to the erased • If the [Reverse erase position of back face] checkbox is set to will be erased. , the edge in the same position as on the front side 5 Specify the erase width. After the settings are completed, tap and [Back] keys in sequence. • Tap the numeric value display indicating the margin shift area on the front side or reverse side, and enter the area using the numeric keys. • To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with . To cancel the erase setting: Tap the [Clear] key. 4-85