Sharp MX-M4070 User Manual - Page 286

COPIER►OTHER FUNCTIONS 3 Others Erase Clear Booklet Copy Like A Pamphlet Original Change Size/Direction. Tap the checkbox of the edge that you wish to erase, and specify the erase Up Outer Frame 2-Sided Copy Background Adjustment position. Specify Frame+Center Left Right Reverse erase position of Down back face Preview CA Check that he tapped checkbox is set to . If the [Outer Frame] key is tapped, the [Up], [Down], [Left], and [Right] checkboxes are set to . If the [Specify Frame+Center] key is tapped, all the Back 8½x14 11x17 Start checkboxes are set to . Specify the erase edge on the reverse side when erasing edges of one to three sides of Up, Down, Left, and Right on the front side to scan a 2-sided original. • If the [Reverse erase position of back face] checkbox is set to edge on the front side will be erased. , the edge in the position opposite to the erased • If the [Reverse erase position of back face] checkbox is set to will be erased. , the edge in the same position as on the front side 4 Specify the erase width. Tap the numeric value display indicating the margin shift area on the front side or reverse side, and enter the area using the numeric keys. After the settings are completed, tap and [Back] keys in sequence. To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with . • To cancel the erase setting: Tap the [Clear] key. • To cancel all settings: Tap the [CA] key. 5 Tap the [Start] key to start copying. 2-78