Sharp MX-M4070 User Manual - Page 669

SCANNER/INTERNET FAX►OTHER FUNCTIONS 5 Tap the [Start] key to start scanning of the original. A beep will sound to indicate that scanning has ended. Tap the [Preview] key to check the preview of an image before sending a fax. For more information, see "CHECKING THE IMAGE TO BE TRANSMITTED (page 5-68)". However, settings for this function cannot be changed in the preview screen. 6 Address Subject 1 pages of original (Pg.No.2) have been scanned. Send the scanned data? Global Address Search Sending History Check the number of original sheets. The number that is displayed is the number of scanned File Name Call Search Number original sheets, not the number of scanned original pages. Color Mode Auto/Grayscale Resolution 200x200dpi File Format PDF Verification Stamp For example, when 2-sided copying is performed using one Call Program Call Registered settings Check Send/Receive original, the number "1" will appear to indicate that one Cancel OK Status original sheet was scanned, not "2" to indicate the front-side Original Exposure Auto Others Scan Size Auto 8½x11 Send Size 100% Auto 8½x11 Preview CA Start page and the reverse side page. 7 Tap the [OK] key to start transmission. If this function is combined with [Job Build], the count result is displayed after the [Read-End] key has been tapped. If this step is not performed within one minute after the above confirmation screen appears, the scanned image and settings will be cleared and the base screen will reappear. Scanning will not be completed automatically and the image will not be reserved for transmission. If the displayed number of original sheets is different from the actual number of sheets: Tap the [Cancel] key and then tap the [OK] key in the message screen to clear all scanned data. Scan settings and destination settings will not be cleared. Insert the original sheets in the document feeder tray again and tap the [Start] key to re-scan. 5-111