Sharp MX-M4070 User Manual - Page 830

SYSTEM SETTINGS►SYSTEM SETTINGS Custom Link Setting The stored Web addresses can be displayed in the display area of the setting menu. Click a custom link to jump to the website of the stored address. Network Settings Quick Settings Select the minimum required settings for the machine connection to the network. Wireless Settings Connection Type Use this setting to switch between [Wired Only], [Wired+Wireless (Access Point Mode)] or [Wireless (Infrastructure Mode)]. Keep Wireless Access Point activated This can only be enabled when "Connection Type" is "Wired+Wireless (Access Point Mode)". If disabled, the NFC card reader must be touched to the mobile device or the [Easy Connect (QR code)] key must be tapped in the home screen to enable wireless LAN. When one of the conditions below occurs, the wireless LAN connection is automatically canceled. • When auto clear or auto power shutoff is performed on the machine. • When there is no connection to the access point for a certain period of time. When "Wireless (Infrastructure Mode)" is selected in "Connection Type" Access Point Search Click this to search access points. When the search results are displayed, select the access point to use and click [OK]. [SSID], [Security Type], and [Encry.] are automatically applied. SSID Enter an SSID using up to 32 characters. Security Type Select a security type. Encry. Select an encryption type. Security Key Enter a security key. Security Type Security Key • WEP • WPA/WPA2-mixed Personal • WPA/WPA2-mixed Enterprise • WPA2 Personal • WPA2 Enterprise WEP64bit: 5 characters or 10-digit hexadecimal number WEP128bit: 13 characters or 26-digit hexadecimal number WPA/WPA2: 8 to 63 characters or 64-digit hexadecimal number Show Security Key If it is set to ON, the security key appears. 7-76