Sharp MX-M4070 User Manual - Page 626

SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE SETTING SCAN SETTINGS AUTOMATICALLY (Auto Set) (On the MX-M2630/MX-M3050/MX-M3550/MX-M4050/MX-M5050/MX-M6050, the OCR expansion kit is required.) To automatically set scan settings appropriate for the original, tap the [Auto Set] key in the base screen of Easy Mode. Original 8½x11 Address E-mail Address Original Resolution 2-Sided Auto File Format PDF PDF Detail Blank Page Skip Auto CA Preview Auto Set B/W Start Color Start The following functions are set automatically. • Image Orientation • Resolution • Blank Page Skip Each function setting value/parameter can be changed in setting mode. • When "Auto Set" is enabled, grayed out functions cannot be enabled. • When an Internet Fax address is selected, "Auto Set" cannot be enabled. To change the "Auto Set" setting, use "Settings (administrator)" - [System Settings]→ [Image Send Settings] → [Scan Settings] → [Condition Settings] → [Auto Scan Setting]. The settings below can be selected. • Set Image Orientation Automatically The orientation of placed originals can be automatically detected. Set whether the original is scanned by one-sided scanning or two-sided scanning. • Set Resolution Automatically You can have the machine automatically set the resolution. • Blank Page Skip Set whether or not blank original pages are automatically skipped during scanning. CHECKING THE IMAGE TO BE TRANSMITTED Check the image that will be sent in the touch panel before transmission. You can tap the [Preview] key to check a preview of the image before sending an image. As you can adjust the exposure and resolution to scan the original while checking it in the preview screen, you can send a better quality original to the destination. • Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel. • The preview function is not available when the original size is set to Long Size. 5-68