Sharp MX-M4070 User Manual - Page 847
IPsec Settings
View all Sharp MX-M4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 847 highlights
SYSTEM SETTINGS►SYSTEM SETTINGS IPsec Settings IPsec can be used for data transmission/reception on a network. When IPsec is used, data can be sent and received safely without the need to configure settings for IP packet encryption in a Web browser or other higher-level application. When enabling this settings, take the following notes. • It may take some time to reflect on the machine settings, and you cannot connect to the machine during this time. • If the Setting mode (Web version) settings are not correctly selected, connection to the machine may not be allowed, or the settings may not allow printing, scanning, or Setting mode (Web version) display. In this case, deselect this setting and change the System Settings (on Web pages). Condition Settings IPsec Settings Specify whether or not IPsec is used for transmission. IKEv1 Settings Pre-Shared Key Enter the Pre-Shared Key to be used for IKEv1. SA Lifetime (time) Set the SA lifetime. SA Lifetime (size) Set the SA lifetime size. IKE Lifetime Set the IKE lifetime. IPsec Rules The registered IPsec rules are displayed. To add a new rule, click the [Add] key. To delete a rule, select the rule you want to delete and click the [Delete] key. IPsec Rule Registration Rule Name Enter a name for the IPsec rule. Priority Set the priority level. Select the Rule Name to be the Registration Model If there is a previously registered rule that is similar to the rule you want to create, you can create the new rule based on the registered rule. Device Address Set the type of IP address to be used on the machine and the port number (for IPv6, set the port number / prefix length). Client Address Set the destination IP address type and port number (for IPv6, set the port number / prefix length). Communication Type Set the communication type used for IPsec. Protocol Set the protocol to be used. Filter Mode Set the filter to be used for IPsec. IPsec Encryption Configure settings for the authentication method used for IPsec. ESP Select to use ESP authentication. Allow Communication not using ESP Specify whether or not communication that does not use ESP is allowed. 7-93