Sharp MX-M4070 User Manual - Page 240
Making Copies Using The Bypass Tray
View all Sharp MX-M4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
COPIER►BASIC PROCEDURE FOR MAKING COPIES MAKING COPIES USING THE BYPASS TRAY MAKING COPIES USING THE BYPASS TRAY In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, tab paper, and other special media. For detailed information on paper that can be loaded into the bypass tray, see "APPLICABLE PAPER TYPES (page 1-105)". For precautions on loading paper into the bypass tray, see "LOADING PAPER INTO THE BYPASS TRAY (page 1-114)". Prohibit feeding of paper from the bypass tray when performing duplex copy. In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Disabling of Bypass-Tray in Duplex Copy]. Disables the use of the bypass tray when making 2-sided copies. The bypass tray is often used to feed label sheets, transparency film, and other special media for which 2-sided copying is prohibited. If a sheet of one of these special media enters the reversing unit, a misfeed or damage to the unit may result. If special media for which 2-sided copying is prohibited is often used, it is recommended that you enable this setting. 1 Load paper into the bypass tray. ► LOADING PAPER INTO THE BYPASS TRAY (page 1-114) 2 Tap the [Paper Select] key, and tap the bypass tray key. Each tray key displays the size and type of the loaded paper. ► SELECTING THE PAPER TRAY FOR COPYING (page 2-11) 3 To select more detailed settings, tap the [Detail] key to switch to normal mode. ► CHANGING MODES (page 1-19) 4 Tap the [Paper Select] key. 5 Paper Select No. of copies 1 Change Current Type and Size of Selected Tray Original Change Size/Direction. Tap the [Type and Size] key, and select the size and type of the paper. Paper Tray 1 8½x11 Plain 1 8½x11R 2 Plain 1 Bypass Tray 8½x11 Plain 1 Type and Size Copy Ratio Enlarge/Reduce Copy 2-Sided Copy Margin Shift Shift Position to Have Margin ► SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY (page 2-33) 8½x14 3 Plain 1 11x17 4 Plain 1 Preview CA BByyppasassTsraTyr:aPyla:inP1la(6i0n-(8690g/m- 27) 9g/m2) Others 8½x14 11x17 Start 6 Place the original. Place the original in the document feeder tray of the automatic document feeder, or on the document glass. ► AUTOMATIC DOCUMENT FEEDER (page 1-124) ► DOCUMENT GLASS (page 1-126) 2-32