Sharp MX-M4070 User Manual - Page 258

COPIER►BASIC PROCEDURE FOR MAKING COPIES Copy by automatically calculating the repeat count (Auto Repeat) 1 Place the original. Place the original in the document feeder tray of the automatic document feeder, or on the document glass. ► AUTOMATIC DOCUMENT FEEDER (page 1-124) ► DOCUMENT GLASS (page 1-126) 2 Tap the [Detail] key to change to normal mode. ► CHANGING MODES (page 1-19) 3 Tap the [Others] key, and then tap the [Repeat Layout] key. 4 Tap the [Auto Repeat] key. 5 Others Repeat Layout Original Change Size/Direction. Background Adjustment Check the repeat faces which have been calculated automatically. Auto Layout of Repeat Face Based on Original, Paper Size and Ratio. Exposure Off Current Setting Select Type/Exposure Change the original size, paper size, or copy ratio by tapping Auto Repeat Original 5½x8½R Repeat Number the respective [Original], [Paper Select], or [Copy Ratio] key Fixed Repeat Paper Select 8½x11 1 Photo Repeat Copy Ratio 100% Parting Line Preview CA when necessary. ► SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL (page 2-27) Off Back 8½x14 11x17 ► MANUAL RATIO SELECTION (page 2-22) Start ► SELECTING THE PAPER TRAY FOR COPYING (page 2-11) Set so that there are one or more repeat faces. 6 Others Repeat Layout Auto Layout of Repeat Face Based on Original, Paper Size and Ratio. Off Auto Repeat Fixed Repeat Photo Repeat Current Setting Original Paper Select Copy Ratio Parting Line Off Back 5½x8½R 8½x11 100% Repeat Number 1 8½x14 11x17 Original Change Size/Direction. Background Adjustment Exposure Select Type/Exposure Preview CA Start • To cancel the Auto Repeat setting: Tap the [Off] key. • To cancel all settings: Tap the [CA] key. Specify the repeat partition line. After the settings are completed, tap sequence. and [Back] keys in 2-50