Sharp MX-M4070 User Manual - Page 841
Wireless Settings
View all Sharp MX-M4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 841 highlights
SYSTEM SETTINGS►SYSTEM SETTINGS Wireless Settings It provides access to a network via a wireless LAN. Clicking the [Submit] button stores the settings. Connection Type Use this setting to switch between [Wired Only], [Wired+Wireless (Access Point Mode)] or [Wireless (Infrastructure Mode)]. Keep Wireless Access Point activated This can only be enabled when "Connection Type" is "Wired+Wireless (Access Point Mode)". If disabled, the NFC card reader must be touched to the mobile device or the [Easy Connect (QR code)] key must be tapped in the home screen to enable wireless LAN. When one of the conditions below occurs, the wireless LAN connection is automatically canceled. • When auto clear or auto power shutoff is performed on the machine. • When there is no connection to the access point for a certain period of time. Current Setting Shows settings, such as the SSID of a wireless LAN and security type. If the wireless LAN is disabled, "--" appears. Current Wireless Status This shows reception levels (Max. 100) of the wireless LAN and IP addresses. Show Wireless Setting Screen Click the [Setup] button. In the Wireless Setting screen, you can configure the SSID of a wireless LAN, Security Type, Encry., and Security Key. Initialize Wireless Settings Click the [Initialize] button. The settings for SSID, Security Type, Encry., and Security Key are initialized. Wireless Setting screen (Access Point Mode) If the [Setup] button is clicked while [Connection Type] is set to [Wired+Wireless (Access Point Mode)] or [Wired Only], the Wireless Settings (Access Point Mode) screen is displayed. Configure the SSID of a wireless LAN, Security Type, Encry., and Security Key. Clicking the [Submit] button stores the settings. SSID Enter an SSID using up to 32 characters. Security Type Select a security type. Encry. Select an encryption type. Security Key Enter a security key. Security Type Security Key • WEP • WPA/WPA2-mixed Personal • WPA2 Personal WEP64bit: 5 characters or 10-digit hexadecimal number WEP128bit: 13 characters or 26-digit hexadecimal number WPA/WPA2: 8 to 63 characters or 64-digit hexadecimal number Show Security Key If it is set to ON, the security key appears. 7-87