Sharp MX-M4070 User Manual - Page 8

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE (10) (11) (12) (13) (14) (15) (16) (23) (24) (25) (17) (18) (19) (20) (10) Saddle Stitch Finisher (large stacker)*1 This staples and folds paper. A punch module can also be installed to punch holes in output paper. You can also perform stapling manually. ► SADDLE STITCH FINISHER (LARGE STACKER) (page 1-173) (11) Paper pass unit*1 Relay between the machine and the finisher, finisher (large stacker), saddle stitch finisher or saddle stitch finisher (large stacker). (12) Motion sensor*2 This sensor detects the presence of a person that approaches the machine, and automatically wakes the machine from sleep mode (Motion Sensor Mode Only). (13) Utility table*1 You can use this as a work platform, or temporarily place originals or a mobile device. • Do not place anything that weighs more than 5kg or otherwise apply a load. • Do not place a container that contains water or other liquid. Risk of fire and electrical shock if the liquid spills and enters the machine. • Working on the table while the machine is in operation may cause poor image quality or other problems. (14) Bypass tray Use this tray to feed paper manually. When loading paper larger than 8-1/2" x 11"R or A4R, pull out the extension guide. ► LOADING PAPER INTO THE BYPASS TRAY (page 1-114) (15) Tray 5 (when a large capacity tray is installed)*1 Store paper in this tray. ► LOADING PAPER IN THE LARGE-CAPACITY TRAY (when a large capacity tray is installed) (page 1-112) (16) Tray 1 Store paper in this tray. ► TRAY 1 - 4 (when a low stand/550 sheet paper drawer or stand/550/2x550/3x550/ 550&2100 sheet paper drawer is installed) (page 1-108) (17) Finisher*1 This staples paper. A punch module can also be installed to punch holes in output paper. ► FINISHER (page 1-162) (21) (22) (18) Saddle Stitch Finisher*1 This staples and folds paper. A punch module can also be installed to punch holes in output paper. ► SADDLE STITCH FINISHER (page 1-169) (19) Finisher (large stacker)*1 This staples paper. A punch module can also be installed to punch holes in output paper. You can also perform stapling manually. ► FINISHER (LARGE STACKER) (page 1-165) (20) Punch module*1 This is used to punch holes in output. Requires an inner finisher, finisher, finisher (large stacker), saddle stitch finisher or saddle stitch finisher (large stacker). (21) Tray 3 (when a stand/2x550/3x550 sheet paper drawer is installed)*1 Store paper in this tray. ► TRAY 1 - 4 (when a low stand/550 sheet paper drawer or stand/550/2x550/3x550/ 550&2100 sheet paper drawer is installed) (page 1-108) (22) Tray 4 (when a stand/3x550 sheet paper drawer is installed)*1 Store paper in this tray. ► TRAY 1 - 4 (when a low stand/550 sheet paper drawer or stand/550/2x550/3x550/ 550&2100 sheet paper drawer is installed) (page 1-108) (23) Tray 2 (when a low stand/550 sheet paper drawer or stand/550/2x550/3x550/550&2100 sheet paper drawer is installed)*1 Store paper in this tray. ► TRAY 1 - 4 (when a low stand/550 sheet paper drawer or stand/550/2x550/3x550/ 550&2100 sheet paper drawer is installed) (page 1-108) (24) Tray 4 (when a stand/550&2100 sheet paper drawer is installed)*1 Store paper in this tray. ► TRAY 3 - 4 (when a stand/550&2100 sheet paper drawer is installed) (page 1-110) (25) Tray 3 (when a stand/550&2100 sheet paper drawer is installed)*1 Store paper in this tray. ► TRAY 3 - 4 (when a stand/550&2100 sheet paper drawer is installed) (page 1-110) *1 Optional *2 Can only be used on the MX-M3070/MX-M3570/MX-M4070/MX-M5070/MX-M6070. 1-5