Sharp MX-M4070 User Manual - Page 59

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE Automatic Logout Setting When user authentication is enabled, this setting specifies whether or not to enable automatic logout. The time until logout can be specified up to 240 seconds in increments of 10 seconds. Case sensitivity of login name is enabled. Set whether or not to make login names used at the time of user authentication case sensitive. If the checkbox is set to , login names with identical spelling but different cases (upper and lower) will be identified as different login names. Therefore, login names with identical spelling but different cases will be authenticated as user names of different users. If the checkbox is set to , case sensitivity for login names is disabled. Therefore, identically spelled user names with upper and lower case character differences will be authenticated as the user name of the same user. If the selected checkbox is changed to , and identical user names with only upper and lower case character differences exist, the user names that have already been registered are identified as user names of different users. Apply login name to the user name of network folder Apply login name to the user name of network folder Edit Help Display of Login Screen Settings you have created here is displayed on the login screen. User Information Print Prints the following item lists. • User List • List of Number of Pages Used • Page Limit Group List* • Authority Group List • Favorite Operation Group List* • All User Information Print Select each item and tap the [Print] key to print it out. * Cannot be printed when no groups are stored. • To specify [One Sided] or [Two Sided] printing in List Print, select "Settings" → [System Settings] → [Common Settings] → [Device Control] → [List Prints]. • In All User Information Print, the following items are handled by 2-sided printing on an item basis. •User List •List of Number of Pages Used •Page Limit Group List •Favorite Operation Group List Reset Counter After Sending E-mail Status After E-mail Status has been sent, the counter is reset. This only appears when E-mail Status is enabled. Enable IPP Authentication Except for Printer Driver Enable IPP authentication for other than the printer driver. 1-56