Sharp MX-M4070 User Manual - Page 172

BEFORE USING THE MACHINE►PERIPHERAL DEVICES SADDLE STITCH FINISHER This includes the offset function that outputs sorted paper while staggering each set of paper, the staple sort function that staples each set of prints, the saddle stitch function that automatically staples the center of the sheets and folds the sheets in half, and the paper folding function that folds paper in half. To punch holes in printed paper, install an optional hole punch module. PART NAMES (1) (2) (3) (4) (5) (1) Output tray (upper tray) The tray is slidable. To print on large paper such as A3 paper, extend the tray. (2) Output tray (lower tray) Stapled and offset output is delivered to this tray. The tray is slidable. To print on large paper such as A3 paper, extend the tray. (3) Top cover Open this cover to remove a paper misfeed. (4) Saddle stitch tray Saddle-stitched output is delivered to this tray. (5) Front cover Open this cover to replace the staple cartridge, remove a staple jam, or remove a paper misfeed. • To install a saddle stitch finisher, a paper pass unit and stand/550/2x550/3x550/550&2100 sheet paper drawer are required. • Do not place heavy objects on the saddle finisher or press down on the saddle stitch finisher. • Exercise caution when you turn on the power and when printing take place, as the tray may move up and down. • A saddle stitch finisher cannot be installed simultaneously with an inner finisher, finisher, finisher (large stacker) or saddle stitch finisher (large stacker). 1-169