Sharp MX-M4070 User Manual - Page 95

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE Easy Connection Setting Set this option to use Easy Connection Setting. In "Settings (administrator)", select [System Settings] → [Network Settings] → [Easy Connection Setting]. NFC This appears when an NFC card reader is connected. Enable this setting to connect to mobile devices using an NFC card reader. QR code You can install the dedicated application in a mobile device in advance, and scan the displayed QR code to send and save the connection settings to the mobile device. Destination Set the connection destination for connection by NFC card reader, or the connection destination associated with the QR code. To connect to the machine, select [Connect with the machine]. The information required to connect to the machine is saved in the application. To connect to a destination other than the machine, select [Connect with the following access point]. To set manually, obtain the network information of the connection destination in advance. When [Connect with the following access point] is selected, configure the following settings. Access Point Search Click this to search access points. When the search results appear, select the access point to be used and click [OK].[SSID] of the selected access point, [Security Type], and [Encry.] are automatically applied. Name Enter the access point name. SSID Enter an SSID using up to 32 characters. Security Type Select a security type. Encry. Select an encryption type. Security Key Enter a security key. Security Type Security Key • WEP • WPA/WPA2-mixed Personal • WPA2 Personal WEP64bit: 5 characters or 10-digit hexadecimal number WEP128bit: 13 characters or 26-digit hexadecimal number WPA/WPA2: 8 to 63 characters or 64-digit hexadecimal number Show Security Key If it is set to ON, the security key appears. 1-92