Sharp MX-M4070 User Manual - Page 552

FACSIMILE►PERFORMING F-CODE COMMUNICATION RELAY BROADCAST TRANSMISSION USING F-CODES When your machine receives an F-code relay request transmission, the fax is received and stored in an F-code relay broadcast memory box in your machine. Your machine then relays the fax to each of the destination machines programmed in the memory box. Transmission to the destination machine takes place automatically. The fax is transmitted in sequence to the end receiving machines registered in the F-code relay broadcast memory box. The machine Receiving machine F-code relay broadcast memory box Send Forward Destination F-code relay broadcast transmission Sub Address: AAAAAAAA Passcode: XXXXXXXX Box Name: BBBB Sub Address: AAAAAAAA Passcode: XXXXXXXX Receiving machines are programed in this box • Prior to carrying out the operation, inform the requesting party, who you will communicate with using F-code relay request transmission, of the sub-address and passcode of the F-code relay broadcast memory box in your machine. • Program the destination machines in the F-code relay broadcast memory box when you create the box in your machine. ► CREATING MEMORY BOXES IN THE MACHINE FOR F-CODE COMMUNICATION (page 4-107) • It is not necessary for the destination machines to support F-code communication. • The machine that requests a relay broadcast transmission only bears the cost of sending the fax to your machine (the relay machine). Your machine bears the cost of sending the fax to each of the destination machines. • If both direct SMTP and other sending methods are added to the forwarding destinations, transmission will not take place. When faxes forwarded using this function are printed at the forwarding destination, the date and time of reception cannot be printed on the faxes. ("Receiving Date & Time Print" is disabled.) 4-119