Sharp MX-M4070 User Manual - Page 298

COPIER►OTHER FUNCTIONS ADJUSTING RESOLUTION WHEN SCANNING (RESOLUTION) This function adjusts the resolution when scanning the original, enabling the high-quality output or speed-priority output according to the application. • Resolution must be specified before scanning the original. • The resolution setting is applied when making a full-size copy. 1 Tap the [Others] key, and tap the [Scan Resolution] key. 2 Others Scan Resolution This setting is applied when copy ratio is set to 100%. Document Feeder 600x300dpi Document Glass 600x400dpi 600x400dpi 600x600dpi 600x600dpi Back 8½x14 11x17 Original Change Size/Direction. Exposure Select Type/Exposure Toner Save Reduce Toner Consumption Background Adjustment Erase Erase Shadow Around Preview CA Start Select the resolution. The resolution can be set to both the document feeder and document glass. After the settings are completed, tap and [Back] keys in sequence. 3 Place the original. Place the original in the document feeder tray of the automatic document feeder, or on the document glass. ► AUTOMATIC DOCUMENT FEEDER (page 1-124) ► DOCUMENT GLASS (page 1-126) 4 Tap the [Start] key to start copying. • High Quality Scan from Document Feeder In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [High Quality Scan from Document Feeder]. The resolution for copying using the automatic document feeder can be changed from 600 x 400 dpi to 600 x 600 dpi (high quality mode). When high quality mode is used, fine print and thin lines are reproduced with greater clarity, however, the scanning speed is slower. When high quality mode is not selected, the following conditions must be satisfied in order to scan at 600 x 400 dpi and attain the fastest speed. • The copy ratio must be set to 100%. • Do not select a special mode that will change the ratio. • [Copy of Copy] must not be enabled. • Quick Scan from Document Glass In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Quick Scan from Document Glass]. The resolution for copying using the document glass can be changed from 600 x 600 dpi to 600 x 400 dpi (high speed mode). When high speed mode is selected, the first copy time is quicker, however, the copy image is not as clear. When high quality mode is not selected, the following conditions must be satisfied in order to scan at 600 x 400 dpi and attain the fastest speed. • The copy ratio must be set to 100%. • Do not select a special mode that will change the ratio. • [Copy of Copy] must not be enabled. 2-90