Sharp MX-M4070 User Manual - Page 458
When The Line Is Busy, When A Communication Error Occurs
View all Sharp MX-M4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 458 highlights
FACSIMILE►BASIC TRANSMISSION METHODS WHEN THE LINE IS BUSY If the line is busy when you send a fax, transmission will be attempted again automatically after a preset interval. This function only operates in memory transmission mode. In direct transmission mode or manual transmission mode, the transmission will be canceled. Wait for a brief period and then try sending the fax again. To cancel transmission: Do so from the job status screen. ► STOPPING/DELETING A JOB IN PROGRESS OR RESERVED (page 1-130) To set the number of recall attempts and the interval between attempts when the connection cannot be established because the line is busy, or for other reasons: In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] → [Recall in Case of Line Busy]. When this setting is enabled, note that the machine will not attempt the call again when manual transmission or direct transmission is used. • Number of Times to Recall in Case of Error Specify how many times the machine will attempt the call again when a communication error occurs. During recalling, you can set the number of recall attempts. Any number from 1 to 15 can be selected. • Interval to Wait Between Recall Attempts (min.) in Case of Error The interval between recall attempts can be set. Any number of minutes from 1 to 15 can be selected. WHEN A COMMUNICATION ERROR OCCURS If a communication error occurs or the other fax machine does not answer the call within a preset period of time, transmission will automatically be attempted again after a preset interval. This function only operates in memory transmission mode. Faxes sent by direct transmission or manual transmission are not automatically resent. To cancel transmission: Do so from the job status screen. ► STOPPING/DELETING A JOB IN PROGRESS OR RESERVED (page 1-130) To set the number of recall attempts and the interval between attempts when a transmission fails due to an error: In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] → [Recall in Case of Communication Error]. • Number of Times to Recall in Case of Error Specify how many times the machine will attempt the call again when a communication error occurs. During recalling, you can set the number of recall attempts. Any number from 1 to 15 can be selected. • Interval to Wait Between Recall Attempts (min.) in Case of Error The interval between recall attempts can be set. Any number of minutes from 1 to 15 can be selected. 4-25