Sharp MX-M4070 User Manual - Page 36

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE PREHEAT MODE This mode lowers the temperature of the fusing unit and makes the machine wait in low power consumption state. Preheat mode will activate when the set duration of time elapses in waiting status without executing a job. Compared to Auto Power Shut-Off Mode, the amount of energy saved is less and the wakeup time is shorter. In the preheat mode, the [Home Screen] key is lit and the light goes off for the touch panel and the [Power Save] button. The touch panel is cleared when it is tapped or the [Home Screen] button is pressed. To set preheat mode: "Settings (administrator)" → select [System Settings] → [Energy Save] → [Eco Setting] → [Preheat Mode Setting]. A message appears 15 seconds before Preheat Mode is entered. To close the message and continue normal operation, tap the [Continue] button. If no action is taken within 15 seconds after the message appears, the machine enters preheat mode. To set display of the message: In "Settings (administrator)", select [System Settings] → [Energy Save] → [Eco Setting] → [Display Message When Extending Transition Time to Preheat/Auto Power Shut-Off Mode]. ECO RECOMMENDATION FUNCTION DISPLAY Shows recommended copy/print settings for copy, document filing reprint, and direct print. Copying When you change to copy mode (normal mode), the settings recommended for copy mode appear. Recommended settings: 2-Sided Copy, N-Up, and Image Orientation Document filing print When you tap the [Choose Print Settings] in the action panel on the file list screen of document filing, the settings recommended for this mode appear. Recommended settings: 2-Sided Print, and N-Up. Direct print When you tap the [Choose Print Settings] in the action panel on the file list screen of direct print, the settings recommended for this mode appear. Recommended settings: 2-Sided Print, and N-Up. 1-33