Sharp MX-M4070 User Manual - Page 821

SYSTEM SETTINGS►SYSTEM SETTINGS Server Settings Receive Settings Internet Fax Receive Set whether or not Internet Fax reception is performed. POP3 Server Enter a maximum of 127 half-width characters for the name of the POP3 server to be used. Port Number Specify the port number of the POP3 server to be used. POP Authentication Set to use POP authentication. User Name Enter a maximum of 64 characters for the user name used to access the server. Password Enter a maximum of 32 characters for the password used to access the server. POP3 Communication Timeout Set a timeout for communication to the POP3 server. Reception Check Interval Setting Enter an acknowledge cycle to the POP3 server. Enable SSL Use SSL to encrypt data before transmission. Default Settings Own Number and Name Set Set I-Fax Own Name Enter a maximum of 20 full-width/half-width characters for the sender name for Internet Fax transmission. Source Address Enter a maximum of 56 half-width characters for the sender address for Internet Fax transmission. Direct SMTP Setting Port Number (Receive), Port Number (Send) Specify the port number used for transmission and reception by direct SMTP. Timeout Set the wait time until transmission or reception is canceled when a response is not received from the server during direct SMTP transmission/reception. 7-67