Sharp MX-M4070 User Manual - Page 842
Wireless Setting screen Infrastructure Mode
View all Sharp MX-M4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 842 highlights
SYSTEM SETTINGS►SYSTEM SETTINGS Device IP Address (Access Point Mode) Enter the IP address. Channel Select the channel to be used in wireless LAN. Sending Output Configure the sending output. Bandwidth Use this setting when the communication mode is "11n". Select the bandwidth to be used. IP Address Distribution Range Setting Configure the range to be used the IP address. Wireless Setting screen (Infrastructure Mode) If [Connection Type] is set to [Wireless (Infrastructure Mode)] and the [Setup] button is clicked, the infrastructure mode wireless setting screen is displayed. Configure the SSID of a wireless LAN, Security Type, Encry., and Security Key. Clicking the [Submit] button stores the settings. Access Point Search Click this to search access points. When the search results are displayed, select the access point to use and click [OK]. [SSID], [Security Type], and [Encry.] are automatically applied. SSID Enter an SSID using up to 32 characters. Security Type Select a security type. Encry. Select an encryption type. Security Key Enter a security key. Security Type Security Key • WEP • WPA/WPA2-mixed Personal • WPA/WPA2-mixed Enterprise • WPA2 Personal • WPA2 Enterprise WEP64bit: 5 characters or 10-digit hexadecimal number WEP128bit: 13 characters or 26-digit hexadecimal number WPA/WPA2: 8 to 63 characters or 64-digit hexadecimal number Show Security Key If it is set to ON, the security key appears. 7-88