Sharp MX-M4070 User Manual - Page 444

FACSIMILE►ENTERING DESTINATIONS ENTERING DESTINATIONS This section explains how to enter a destination from the initial screen of easy mode. ► SELECTING FAX MODE (page 4-7) ENTERING DESTINATIONS ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS Prohibit transmission when the fax number/address is entered manually In "Settings (administrator)", select [System Settings] → [Image Send Settings] →[Common Settings] → [Enable/Disable Settings] → [Settings to Disable Transmission] → [Disable Direct Entry]. Prohibit manual entry of fax numbers and addresses. Configure the setting for each of the following items: • E-Mail • Network Folder • Internet Fax (Including Direct SMTP) • Fax 1 Original 8½x11 Address Fax Number Tap the [Direct Entry] key or [Fax Detail Number] to enter the destination fax Address Book Sending History Direct Entry number. CA Preview If you want to specify multiple destinations, tap and enter the next fax number. If you enter an incorrect number, tap the [C] key to delete the number and re-enter. Start Entering a Pause Between Digits of the Number Enter a pause after the number used to dial out from a PBX (for example, after "0"), or after the country code when dialing an international number. 1 Tap the [Pause] key. A hyphen "-" is entered when the [Pause] key is tapped once. If you want to enter a pause between digits of the number: Enter a pause after the number used to dial out from a PBX (for example, after "0"), or after the country code when dialing an international number. The [Pause] key appears on the numeric keys when the destination fax number is entered. A hyphen "-" is entered when the [Pause] key is tapped once. To set the length of pause: In "Settings", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] → [Pause Time Setting]. 4-11