Sharp MX-M4070 User Manual - Page 18

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE TAP OPERATION SETTING You can configure settings for tap operation on the touch panel in "Settings (administrator)" - [System Settings] → [Common Settings] → [Operation Settings] → [Condition Settings] → [Key Operation Setting]. Key Operation Setting Keys Touch Sound Controls the key touch sound level, or turns the sound off. Make Key Touch Sound at Default Setting When you specify the exposure in the exposure adjustment screen of each mode, a bleep sounds three times when the reference value is reached. Screen in which setting is effective Initial value Ratio setting screen in base screen of copy mode Ratio 100% Exposure setting screen in base screen of copy mode Exposure adjustment screen in base screen of fax, Internet fax, and network scanner modes Exposure level: 3 (medium) Exposure adjustment screen for Scan to HDD in document filing mode Auto Clear Setting The time until Auto Clear activates can be set to any number of seconds from 10 to 240 in increments of 10 seconds. If the machine is not used for the duration of time set here, the auto clear function will clear any settings that have been selected and return the screen to the base screen of copy mode or the job status screen. Cancel Timer This is used to disable the auto clear function. Key Operation Setting Time for Accepting Key Entry This setting determines how long a key in the touch panel must be tapped until the key input is registered. The time can be set from 0 to 2 seconds in increments of 0.5 seconds. By lengthening the time setting, key input can be prevented when a key is tapped accidentally. Keep in mind, however, that when a longer setting is selected more care is required when tapping keys to ensure that key input is registered. Disable Auto Key Repeat This is used to disable key repeat. Key repeat causes a setting to change continuously not only each time the key is tapped but while a key is tapped. Time for Accepting Key Entry of Long Touch Select a time when a long key touch is detected. Double Tap Interval Setting Select an interval when a double tap is detected. 1-15