Sharp MX-M4070 User Manual - Page 290
Sets a movement distance., Place the original., Tap the [Start] key to start copying.
![]() |
View all Sharp MX-M4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
COPIER►OTHER FUNCTIONS 4 Others Position Image Please designate print start position. Side1 X0 ( -17~17 ) inch Side2 0 Clear ( -17~17 ) inch Original Change Size/Direction. Erase Erase Shadow Around 2-Sided Copy Sets a movement distance. Tap the area indicating the movement distance on the front or reverse side, and enter the distance using numeric keys. After the settings are completed, tap and [Back] keys in sequence. Y0 ( -11~11 ) inch Y 0 ( -11~11 ) inch Preview CA Adjust 2nd pg value to 1st. Back 8½x14 11x17 Start • To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with . • If you set the [Adjust 2nd pg value to 1st.] checkbox to , goes out and you can set sides 1 and 2 separately. • If you want to copy in the horizontal orientation, specify "Left" as the starting side of the original. Even if you copied in the horizontal orientation, setting the starting side of the original to the top enables measurement of the movement distance in the same way as in the vertical orientation. To cancel the Position Image setting: Tap the [Clear] key. 5 Place the original. Place the original in the document feeder tray of the automatic document feeder, or on the document glass. ► AUTOMATIC DOCUMENT FEEDER (page 1-124) ► DOCUMENT GLASS (page 1-126) To cancel all settings: Tap the [CA] key. 6 Tap the [Start] key to start copying. 2-82
![](/manual_guide/products/sharp-mxm2630-user-manual-495e78d/290.png)