Sharp MX-M4070 User Manual - Page 490
Printing Received Data At A Specified Time
View all Sharp MX-M4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 490 highlights
FACSIMILE►FAX RECEPTION • To display the received data list screen after entering the PIN Code: In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Common Settings] → [Condition Settings] → [Preview Setting] → [Received Data Image Check Setting]. • To transfer received data to another machine: In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Inbound Routing (Forwarding/Storing) Settings]. PRINTING RECEIVED DATA AT A SPECIFIED TIME You can start printing the received data at a specified time. For stress-free printing, you should avoid printing large numbers of pages at peak times during the day, and when you do not urgently need to print. Prints Set to print data received during the day at 20:00 At 20:00, printing begins automatically • The printed data is automatically deleted from memory. • If the power is turned off at the specified time, printing will start at the timing when the power is turned on. • This function can be used when "Settings (administrator)" - [System Settings] → [Image Send Settings] → [Common Settings] → [Condition Settings] → [Preview Setting] → [Received Data Image Check Setting] is enabled. If Hold Setting for Received Data Print is enabled, this function is not available. • To print received data at the specified time: In "Settings", select [System Settings] → [Image Send Settings] → [Common Settings] → [Condition Settings] → [Time Specified Output of Received Data]. When "Change Password" or "Hold Setting for Received Data print" is , the password entry field is grayed out. • To disable the hold setting for received data print: In "Settings (administrator)", disable this function using [System Settings] → [Image Send Settings] → [Common Settings] → [Condition Settings] → [Hold Setting for Received Data Print]. 4-57