Sharp MX-M4070 User Manual - Page 836

SYSTEM SETTINGS►SYSTEM SETTINGS Port Number Enter a port number. The default setting is port 123. Timeout Enter a timeout. The default setting is 5 seconds. Synchronous Interval Enter an interval to synchronize to the SNTP server. Synchronize Upon Start To establish synchronization during machine startup, set to . Synchronize Now When tapped, the machine is synchronized with the SNTP server time. mDNS mDNS Settings mDNS Set this option to use the mDNS settings. Service Name Enter a service name. Domain Name Display the domain name. Highest Priority Service Select a service you use with the priority. SNMP SNMP v1 Settings SNMP v1 Settings Set this option to use the SNMPv1 settings. Access Method Set an access method. GET Community Enter the GET community name to fetch the device information using SNMP. SET Community Enter the SET community name required for SNMP setting. Change SET Community To change the SET community, set . TRAP Community Enter the community name to be used for the SNMP TRAP sent from the device. TRAP Target Address Enter the IP address of the destination computer for SNMP TRAP communication. SNMP v3 Settings SNMP v3 Settings Set this option to use the SNMPv3 settings. User Name Enter the user name. Authentication Key Enter the authentication key. Privacy Key Enter the privacy key. Context Name Display the context name. 7-82