Sharp MX-M4070 User Manual - Page 233
Enlarging/reducing The Length And Width Separately
View all Sharp MX-M4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
COPIER►BASIC PROCEDURE FOR MAKING COPIES ENLARGING/REDUCING THE LENGTH AND WIDTH SEPARATELY This section explains how to individually specify the horizontal and vertical copy ratios. When 50% is selected for the horizontal ratio and 70% is selected for the vertical ratio 50% 70% The following two methods can be used to specify the ratio. Using the preset ratio key Specify any ratio by combination of preset ratio key, which is pre-registered, with the adjust the ratio in 1% units. key, which allows you to Specifying the image dimensions Specify the image sizes of the original and output to automatically obtain the appropriate ratio. Enter the vertical and horizontal sizes. When the automatic document feeder is used, the vertical and horizontal ratio selection ranges are both between 25% to 200%. To cancel the XY zoom setting: Tap the [Zoom] tab or the [CA] key. Using the preset ratio key 1 Tap the [Detail] key to change to normal mode. ► CHANGING MODES (page 1-19) 2 Tap the [Copy Ratio] key, and then tap the [XY Zoom] tab. 3 Copy Ratio Zoom No. of copies 1 XY Zoom Auto Image Y 100 ( 25~400 ) % 50% 141% X 100 ( 25~400 ) % 100% Others 64% 70% 200% 400% by Size 8½x14 11x17 Original Change Size/Direction. Paper Select Change Paper Feed Tray 2-Sided Copy Background Adjustment Preview CA Start Tap the [X] key, and set the X (horizontal) ratio. 2-25