Cisco SFS7000P-SK9 Command Reference - Page 100
speed, show interface fc, auto-negotiate, half-duplex, show fc srp initiator, show interface ethernet
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
speed Chapter 2 Administrative Commands Examples InfiniBand: The speed command sets the administrative speed only. Self-detection determines the actual speed, which depends on the capabilities of the connection. You must disable the auto-negotiation feature to manually configure speed. The following example sets the preferred speed to 1,000 Mbps (1 Gbps). The results of this command may be viewed in the admin-speed field for Fibre Channel interfaces using the show interface fc command: SFS-7000P(config-if-fc-5/4)# speed 1000 The following example sets the ethernet interface (slot 4, port 1) to a speed of 100 Mbps: SFS-7000P(config-if-ether-4/1)# speed 100 The following example sets all InfiniBand interfaces on a Cisco SFS 7000 to a speed of 4x: SFS-120(config-if-ib-1/1-1/24)# speed 4x Related Commands auto-negotiate half-duplex show fc srp initiator show interface ethernet 2-70 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02