Cisco SFS7000P-SK9 Command Reference - Page 35
addr-option
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 2 Administrative Commands addr-option addr-option To configure the Ethernet Management port to • use a static IP address, • obtain an IP address from a DHCP server, • automatically obtain an IP address from a hardware-designated controller, enter the addr-option command in Ethernet Management Configuration submode. addr-option {auto | dhcp | static} Syntax Description auto dhcp static Applies an IP address from an outside controller to the Ethernet Management port. Uses DHCP to configure the address for the Ethernet Management port. Changes the address of the Ethernet management port from the DCHP address to the static address that you configure with the ip command. Defaults This command has no default settings. Command Modes Ethernet Management Configuration (config-mgmt-ethernet) mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Ethernet read-write user. If you use the static keyword, configure the IP address of the Ethernet Management port with the "ip" section on page 5-8. Examples The following example configures the Ethernet Management port to obtain an IP address from a DHCP server: SFS-270(config-if-mgmt-ethernet)# addr-option dhcp Related Commands ip OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 2-5