Cisco SFS7000P-SK9 Command Reference - Page 353

Chapter 6 Show Commands show ip http server secure show ip http server secure To view the HTTPS configuration on your Server Switch, enter the show ip http secure server command in User Exec mode or Privileged Exec mode. show ip http secure server Syntax Description This command has no arguments or keywords. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Ethernet read-only user. Use this command to determine if HTTPS actively runs on your Server Switch and to determine the HTTPS port number that it uses. Command Output: Table 6-77 describes the fields in the command output. Table 6-77 show ip http Command Output Field Descriptions Field secure-server secure-port secure-cert-common-name Description Displays "enabled" if you have activated the server with the ip http server command. Displays "disabled" if you have deactivated the server with the no ip http server command. Displays the HTTP port number that the HTTP server uses. Certificate name of the secure server. Examples The following example displays the HTTPS configuration on the Server Switch: SFS-270# show ip http server secure IP HTTP Secure Info secure-server : enabled secure-port : 443 secure-cert-common-name : useMgmtEnetIpAddr OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-187