Cisco SFS7000P-SK9 Command Reference - Page 247

Chapter 6 Show Commands show ib pm config show ib pm config To view the performance monitoring configuration on an InfiniBand subnet, enter the show ib pm config command in User Execute mode or Privileged Execute mode. show ib pm config subnet-prefix prefix Syntax Description subnet-prefix prefix Specifies the subnet prefix of the InfiniBand subnet for which you want to view performance monitoring. Subnet prefix of the InfiniBand subnet for which you want to view performance monitoring Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: General read-only user. Table 6-32 describes the fields in the show ib pm config command output. Table 6-32 show ib pm config Command Output Descriptions Field subnet-prefix state polling period start-delay Description Subnet prefix of the InfiniBand subnet with the performance monitoring configuration you are viewing. State of performance monitoring (enabled or disabled). Interval at which the feature polls ports and connections (in seconds). Time that elapses before performance managing executes (in seconds). Examples The following example displays the output of the show ib pm config command: SFS-120# show ib pm config subnet-prefix fe:80:00:00:00:00:00:00 IB PM Configuration subnet-prefix : fe:80:00:00:00:00:00:00 state : enable polling-period : 10 start-delay : 60 OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-81