Cisco SFS7000P-SK9 Command Reference - Page 225

Chapter 6 Show Commands show fc srp it show fc srp it To display initiator-target pairs that you have configured or that your Server Switch has discovered, enter the show fc srp it command in User Exec mode or Privileged Exec mode. show fc srp it [guid extension target-wwpn] Syntax Description guid extension target-wwpn (Optional) GUID of the initiator in the IT pair. (Optional) GUID extension of the initiator in the IT pair. (Optional) World-wide port name (WWPN) of the target FC storage port in the IT pair. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 3012 Privilege Level: Unrestricted read-write user. Use this command to verify that you successfully created IT pairs on your Server Switch. Table 6-22 show fc srp it Command Output Field Descriptions Field Description guid GUID of the initiator in the initiator-target pair. extension GUID extension of the initiator in the initiator-target pair. target-wwpn WWPN of the target storage. description User-assigned description of the initiator-target pair. non-restricted-ports Ports on your Server Switch that grant the initiator of the IT pair access to storage. active-ports Ports on your Server Switch through which the initiator of the IT pair passes traffic. physical-access Physical ports on your Server Switch to which the initiator of the IT pair connects. mode Displays "normal-mode" or "test-mode." Configure the mode to normal-mode to permit initators to log in to storage. In test-mode, the FC gateway persistently logs in to storage and blocks the initiators. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-59