Cisco SFS7000P-SK9 Command Reference - Page 93

Chapter 2 Administrative Commands shutdown shutdown Use the shutdown command to disable any of the following: • A specific interface card or port • An Ethernet Management port • An InfiniBand Management port • A power supply Enter the shutdown command in the appropriate configuration submode. To enable any of these elements, use the no form of this command. shutdown no shutdown Syntax Description This command has no arguments or keywords. Defaults This command has no default settings. Command Modes Card Configuration (config-card) submode, Ethernet Management Interface Configuration (config-int-mgmt-ethernet) submode, InfiniBand Management Interface Configuration (config-int-mgmt-ib) submode, Ethernet Interface Configuration (config-if-ether) submode, InfiniBand Interface Configuration (config-if-ib) submode, Fibre Channel Interface Configuration (config-if-fc) submode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Unrestricted or card-specific read-write user. Enabling/Disabling a card: Before you use the action command on a card, you must enable (bring up) the card. To enable or disable a card, follow these steps: Step 1 Step 2 Step 3 Step 4 In User Exec mode, enter the enable command to enter Privileged Exec mode. Enter the configure terminal command to enter Global Configuration mode. Enter the card command and specify the card or cards that you want to enable. Enter the shutdown command or the no shutdown command to disable or enable the cards that you specified in the previous step. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 2-63